(951) 342-3100 sales@blacoh.com

Job Stories

Click on a job story below to read more.
SUBMIT YOUR STORY
Flotation Reagent Dosing System

Flotation Reagent Dosing System

Problem: A mining operation required a highly accurate flotation reagent dosing system to support its flotation process. The application involved five independent dosing points, each critical to process performance and metallurgical results.

The existing setup was experiencing precision and reliability challenges, making it difficult to maintain consistent reagent addition. Furthermore, the system needed to dose multiple reagents including collector, diesel, and frother into separate tanks, increasing complexity and the need for a well-integrated solution.

Reliable Rosin Size Dosing

Reliable Rosin Size Dosing

Problem: A pulp and paper facility required highly accurate and reliable rosin size dosing as part of its pulp treatment process. The application demanded precise chemical control to ensure consistent paper quality, while also providing uninterrupted operation in the event of pump maintenance or failure.

Given the critical nature of rosin sizing, the customer needed a fully integrated dosing system that could deliver accuracy and reliability throughout continuous operation.

Deionized Water Dosing in R&D Lab

Deionized Water Dosing in R&D Lab

Problem: As it is a system with 8 units, the deionized water requirement can range from one unit at a time to all 8 simultaneously. The pump pulse was damaging the flow sensors, and the pressurized line was disrupting the solenoid valve cycle. When the water requirement was low or from only one unit, the pump tended to shut down.

Pulsation in Sulfuric Acid Feed

Pulsation in Sulfuric Acid Feed

Problem: MID South Wire Co., Inc. in Nashville, TN uses Yamada Air Operated Double Diaphragm Pumps to supply the feed of sulfuric acid to the centrifuge which is a continuous process and requires as smooth and even a flow rate as possible. The double diaphragm pump was giving good service, but the customer either had to change out the pump for one with continuous flow or find a solution for the pulsation.

Deep Well Injection

Deep Well Injection

Problem: Hydroplex HP-350 triplex plunger pump (0.75 gpm at 10,000 psi) for high pressure deep well methanol injection in an oil & gas upstream pumping application. On the discharge side of the pump, the amount of methanol the pump is dosing is metered. Without a dampener to control pulsations and smooth out the flow, the installed flow meters will not give accurate readings. Additionally, when using a triplex pump it is important that all three chambers of the pump stay full of fluid with no voids. Any voids or pockets can cause seals to leak, pump vibration and excess pump noise.

Aeration and Pulsation of Cleaning Products

Aeration and Pulsation of Cleaning Products

Problem: Pumping household cleaning products such as oven cleaner, furniture polish, floor waxes, and starch. After blending of various chemicals to manufacture the final products, the product is pumped into various holding tanks within the plant. During this process the product travels through long lengths of piping to various filling locations. Foaming and aerating of the various cleaning products created a problem with the filling process of aerosol cans. Also, due to the long lengths of piping, the pumping action of the diaphragm pump created pipe vibration and potential leaks at fittings.

APPLICATIONS
View All Modular, Skid Mounted Chemical Dosing System Flotation Reagent Dosing System Reliable Tailings and Concentrate Sampling Rare Earth Mineral Recycling Pulsation Control in Hi-Temp Coffee Extraction Towers Water Hammer in Wash-Water Header Diesel Transfer Pump Transport of Copper Bearing Solution in Remote Mining Spill Prevention in Contact Lens Factory Label Adhesive Application Chronic Pulsation Issues at Power Plant in Central PA Chemical Process Leak in Boston Achieving Even Application of Screen Coating Reliable Rosin Size Dosing Pump Inlet Cavitation in Power Gen Facility Deionized Water Dosing in R&D Lab Pulsation in Sulfuric Acid Feed Deep Well Injection Aeration and Pulsation of Cleaning Products Filling Hose Failure due to Pulsation Filter Screen Damage from Pulsation Clogged Filters Causing False Gauge Readings Chemical Feed Injection Pulsation Low-Viscosity Injection Pulsation Oil and Gas Long Suction Vibration Diaphragm Pump Failures in Soup Can Manufacturing Diaphragm Failure Causes Repeated Spills in Paint Manufacturing Chemical Manufacturing Excessive Inlet Pressure Reciprocating Pump Pulsation in Power Plant Chemical Injection Pump Vibration Steel Manufacturing Descaling Pulsation Effect of Improper Dampener Application AODD Pump Pulled from Concrete Submarine Constrained Piping Acceleration Head Wastewater Transfer Pulsation Hazardous Waste AODD Containment Failure Paint Manufacturing Abrasive Slurry Diaphragm Failure Decontamination Facility Spray Pulsation Poultry Processing Diaphragm Pump Vibration Pharmaceutical Pump-Induced Pipe Vibration Aerospace Pump-Induced Pulsation Wastewater Sludge Transfer Pump Pulsation Wastewater Sludge Pump Pulsation Bottling Line Water Hammer Tool Manufacturing Manifold Startup Shock Commercial Restroom Flush Water Hammer Resin Plant Drum Filling Water Hammer Pharmaceutical Valve-Induced Water Hammer Hydraulic Transients in Pump Station Surge Causes Highway Shutdown Classic Pulsation Dampening in Peristaltic Hose System Check Valve Backflow Water Hammer